Bookstore Search

Companies producing sterile drug products must remain compliant with all regulations and requirements for current good manufacturing practices (cGMP) for any country or region where they wish to manufacture and market their products. Each regulatory authority presents their requirements through differing …

PDA Technical Report No. 46 (Revised 2024): Last Mile: Guidance for Good Distribution Practices for Pharmaceutical Products to End Users complements the information provided in Technical Report No. 39 (Revised 2021): Guidance for Temperature-Controlled Medicinal Products — Maintaining the Quality …

This document provides points to consider on topics related to the physical environment in which aseptic processing is conducted, monitoring of that environment, cleanroom personnel, material transfer, aseptic process simulation and validation, modern blow-fill-seal technology, cleaning, disinfection …

The contamination control of pharmaceutical and healthcare environments and processes, together with pre-clinical drug development labs, requires a far more holistic approach than simply choosing technologies and disinfectants. Today the microbiologist is expected to understand industrial processes …

Drug manufacturers have employed contamination control measures for decades as a core element of good manufacturing practices. Commonly, these are a collection of generic practices that were developed separately and applied without clear consideration for their interdependence. The ongoing evolution …

This report describes different strategies that can be applied to manage the development and lifecycle of vaccine products. The concepts covered are intended to apply to different types of vaccines, for which "real world" examples are provided. In some cases, the strategy may involve extensive retrospective …

The 2021 PDA Aseptic Process Simulation for Sterile Bulk Pharmaceuticals Survey was designed to provide insight on current industry practices of the aseptic process simulation (APS) used in the production of aseptically produced sterile bulk pharmaceuticals. There were 42 respondents with the survey …

Technical Report No. 41 (Revised): Virus Retentive Filtration, provides a summary of best practices for utilization of virus filtration in process development and manufacturing. The document explains what virus filters are and where they can be used in current and emerging bioprocesses. Recommendations …

This revision of TR 13 aligns with current industry trends and regulatory expectations and provides additional guidance and focus on increased expectations concerning data management and data integrity, qualification and maintenance of controlled environments, and rapid microbiological methods …

This technical report presents a holistic approach for performing a microbiological investigation. It provides a framework to assist with focusing on the investigational areas that may contain or contribute to the root cause of data deviations, such as sampling, test methodology, and suitability of the …

There are very few documents available that provide guidance regarding to requirements for non-sterile drug manufacturing. The Kansai Study Group (KSG) of the PDA Japan Chapter (JPDA) published this paper to offer some consensus-based ideas to help pharmaceutical manufacturers establish appropriate, …

This technical report is a consensus-based resource surrounding the challenges encountered in using complex package systems and introduces important elements to consider in decision-making. It also offers an examination of the technologies available for package integrity testing not yet established by …

Visual inspection of filled injectable products is an important part of the control strategy of the manufacturing process. It offers a means to improve quality by removing noncompliant units and provides information to drive continuous process improvement. This technical report addresses test and inspection …

In this book you will find many different approaches to conducting compliant investigations, where compliant is defined as meeting the requirements of the applicable regulatory documents. The information it provides on conducting investigations that will be acceptable to regulatory investigators will …

This chapter is taken from the book Fungi: A Handbook for Life Science Manufacturers and Researchers, edited by Jeanne Moldenhauer.There is a major gap in understanding fungi in general and mold specifically in the pharmaceutical industry. Most mycologists are in academia and fungi are not taught in …

This timely and informative text discusses aspects of contamination control in cleanrooms seldom described in detail in the literature. The increasing number of warning letters, product recalls and 483 observations related to both particulate and microbial contamination indicates that contamination control …

This second of two volumes details how pharmaceutical and healthcare manufacturers have ben embracing digital technologies as part of the transformation of their business models. It contextualizes current developments and future advancements in terms of the COVID-19 situation of 2020 and specific measures …

La Monografìa Técnica No. 1 original de PDA, Validación de los Ciclos de Esterilización por Vapor, publicada en 1978, introdujo los principios de la esterilización por vapor a una generación entera de cientìficos e ingenieros farmacéuticos. La revisión mantiene un enfoque en microbiologìa e ingenierìa …

This first-of-two volume release from prolific author Tim Sandle fills an important void by taking an in-depth look at the way digital technologies are impacting the pharmaceutical and healthcare landscape both now and into the future. He explores how companies have been embracing digital technologies …

This first-of-two volume release from prolific author Tim Sandle fills an important void by taking an in-depth look at the way digital technologies are impacting the pharmaceutical and healthcare landscape both now and into the future. He explores how companies have been embracing digital technologies …